Resetting The Programmable Buttons - Toshiba SD-H400-S-TU Installation Manual

( Resetting the Programmable Buttons
- - - - - - - - : - - - - - - - - - - - - - - - - - - - - - - -
~~
Resetting the Programmable Buttons
If you make a mistake, or are having difficulty, you can reset the programmable buttons.
All the remote's buttons will return to the unprogrammed state of a new remote (Default
Toshiba TV).
1. Prepare the remote control. Point the remote away from your SD-H400 and cover the
front end with your hand.
Refer to the table below and determine which two buttons to press to reset the remote.
Press and hold the buttons simultaneously for more than 5 seconds.
To Reset:
TV power, volume, TV inpilt AN system power, AN system volume
ALL
and mute
volume, and mute
and mute only
Press the:
TV PWRI!(!) TVNlDEO and TVPWRI!(!)
MUTE and TiVo TiVo and
and TiVo buttons TiVo buttons and TiVo buttons buttons VOL UP buttons
2. Enter the reset code. Refer to the table below and use the number keys on your remote
control to enter the appropriate code. (To cancel, press CLEAR while in programming
mode.
To Reset:
TV power, volume, TV input AN system power, AN system volume
ALL
and mute volume, and mute and mute only
Enter:
9000 9000
I
9111
9111 0981
33