Toshiba SD-H400-S-TU Installation Manual page 21

Ident ficat on of Controls (contInued)
~ Operating with the remote control
Point the remote control at the remote sensor and press the buttons.
Notes on the remote control
• Direct the remote control at the remote
sensor of the SD-H400.
6 o
• Do not drop or give the remote control a
shock.
Do not leave the remote control near an
extremely hot or humid place.
Do not spill water or put anything wet on
the remote control.
Within about 7m (23 feet)
t
Distance: About 7 m (23 feet) from the front of the remote sensor
Angle: About 30° in each direction of the front of the remote sensor
Do not expose the remote sensor of the SD-H400 to a strong light source such as direct sunlight or
other illumination. If you do so, you may not be able to operate the SD-H400 via the remote control.
• Do not disassemble the remote control.
7