Toshiba SD-H400-S-TU Installation Manual page 216

(~
M_a_k_i_n_g _ _ a __ W __r_e_l_e_s_s __ C_o_n_n_e_c_t_o_n _
.,. Making a Wireless Connection
Use this example if you have a home network that includes a wireless access point (WAP)
or wireless router.
To connect a wireless network adapter to your DVR:
o
1.
Connect to the adapter. If it is not already attached, connect one end ofthe USB
cable that came with your wireless network adapter to the port located on the back of
the adapter.
2. Connect to the DVR. Connect the other end ofthe USB cable to the USB port on the
DVR. The power light on the wireless adapter may come on before the cable is
completely inserted into the USB slot. Make sure you push the cable all the way into
the USB slot.
3. Position the adapter. Position the adapter in an open location so that the signal is
easily transmitted. For example, if your DVR is in an entertainment center, you might
place the adapter on top of your entertainment center. Do not place the wireless
The cable may already be attached
to your wireless network adapter.
~
You can leave your DVR plugged in
!t
while you connect a network
adapter.
83