Denon 3800BDCI - DVD Blu-Ray Disc Player Operating Instructions Manual page 39

Function Setup
_r'jRatings
Ratings control allows you to set a limit, which prevents your children from viewing inappropriate
materials. Playback will stop if the ratings exceed the levels you set, and it will require you to enter a
password before the disc will play back.
SO Rating Leval All
DVD Rating Le..' All
""ssword Change
• All
·8 [Adult]
·7 [NC-17]
·6 [R]
·5 [PGR]
·4 [PG13]
·3 [PG]
·2[G]
• 1 [Kid Safe)
Function Setup
RATING EXPLANATIONS
: Parental control is inactive; all discs can play back.
: DVD software of any grades (adult/general/childrenl can be played
back.
: No one under 17 admitted.
: Restricted; under 17 requires accompanying parent or adult guardian.
: Parental guidance recommended.
: Unsuitable for children under 13.
: Parental guidance suggested.
: General audience.
: Suitable for children.
1) Use [<lIt>] to select. then press [ENTER].
2) Press [the Number buttons] to enter your 4-digit password.
For the first time use: Press [the Number buttons] enter any 4-digit number (except for 4737),
then press [ENTER]. That number will be used as the password from the second time. Record your
password in case you forget it.
• If you forgot the password, enter [4], [7], [3], [7]. The password will be cleared and rating level
will be set to NAil".
• While you input the password, press [CLEAR] to clear the number, then re-enter the password.
Proceed to A - C
A) BO Rating Level
1) Use
[~
I
'\7] to select "BO Rating Level", then press [ENTER).
2) Use
[~
I '\7] to select your desired option, then press [ENTER).
"All" : To release the limitation.
"Age Setting":
To set the age limitation.
• After selecting "Age Setting", use [the Number buttons] to enter the age from 0 - 254, then
press [ENTER].
(e.g. for age 15, press [0].[1],[5])
3) Press [SETUP] to exit.
B) OVO Rating Level
1) Use
[~I
'\7] to select "OVO Rating Level", then press [ENTER].
2) Use
[~
I '\7] to select a desired level, then press [ENTER],
3) Press [SETUP] to exit.
36
C) Password Change
1) Use
[~
I '\7) to select "Password Change", then press [ENTER].
2) Enter a new 4-digit password, then press [ENTER].
3) Press [SETUP] to exit.
ENGLISH