Summary of Contents for Denon DVD 3800BDCI - Blu-ray Disc DVD/CD Player
Page 1
Ver.3.09 Data : Mar.24.2008 1 page of 50 Specification Serial Interface DVD − 2500BT / 3800BD D&M Holdings Inc. DENON Brand Company Copyright 2008...
Contents SERIAL COMMUNICATION INTERFACE ..............5 .......................5 HYSICAL INTERFACE ................5 RANSFER FORMAT OF SERIAL DATA ..............6 OMMAND FORMAT AND ANSWER FORMAT ...........6 ROTOCOL FOR DATA TRANSMISSION AND RECEPTION 1.4.1 Basic procedure......................6 1.4.2 Communication errors ....................7 ..................8 OMMAND NSWER SEQUENCE .....................12 IST OF COMMAND CODES ....................13...
Page 3
Ver.3.09 Data : Mar.24.2008 4 page of 50 1.9.17 Cursor ........................33 1.9.18 Enter ........................34 1.9.19 SACD Layer Selsect ....................35 1.9.20 Disc Select .......................36 1.9.21 Disc Skip ........................37 1.9.22 Request CPU Version ...................38 1.9.23 Request Error status.....................39 1.9.24 Request Disc status....................40 1.10...
RS-232C Terminal # Signal I /O S.GROUND Transfer format of serial data - Interface : As per RS-232C or RS-422A - Communication system : Half-duplex communication - Data transfer mode : Start stop synchronization - Transfer rate : 9,600bps - Start bit...
STX ( text start : 02h ) and ETX ( text termination : 03h ) . The receiving station shall regard receipt of BCC as the completion of command reception when it has received STX. Here are the formats. Commands : <STX>...
( MAX 80ms from the start of command transmission ) If the host has received NAK from this unit, it shall retransmit the command that it has transmitted immediately beforehand. Having received an answer, which results in a communication error ( overrun, framing, or parity error ) , the host shall respond with NAK.
Ver.3.09 Data : Mar.24.2008 8 page of 50 Command / Answer sequence Shown below are the command sequence and the answer sequence of this unit. When a command is normally received ( unit ) and an answer is normally received...
Page 8
Ver.3.09 Data : Mar.24.2008 9 page of 50 When a command is abnormally received ( with or without an answer parameter ) HOST UNIT Command Transmitted 40ms 100ms Error Check NG NAK return Command Retransmitted Copyright 2008...
Page 9
Ver.3.09 Data : Mar.24.2008 10 page of 50 When a command with an answer parameter is normally received ( unit ) and an answer is abnormally received ( host ) HOST UNIT Command Transmitted 40ms Error Check OK Answer Transmitted...
Page 10
Ver.3.09 Data : Mar.24.2008 11 page of 50 When a command with an answer parameter is normally received ( unit ) and an answer is normally received with ETB ( host ) HOST UNIT Command Transmitted 40ms Error Check OK...
71h (q) Status information auto toransfer mode setting I carry out a function peculiar to a disk FUNCTION 72h (r) I perform a change of a main stream / sub stream / MAIN/SUB 73h (s) main&sub stream(picture-in-picture). I call various functions.
Invalid 30h (0) Invalid command. Format Error 31h (1) Inappropriate command format. The track , the group ,the title or the chapter you Order Track None 32h (2) specified does not exist. Order Time None 33h (3) The time you specified does not exist.
14 page of 50 Command specification • When this unit is set to be compatible with all commands and fails to accept a command ( due to a communication error, for example ) , it returns NAK ( 15h ) as an answer.
Ver.3.09 Data : Mar.24.2008 15 page of 50 1.9.2 Power OFF This requests a transfer from power-on to a standby state. byte \ bit STX ( 02h ) Command code ( ' ! Reserve ( 00h ) Reserve ( 00h )
Page 16
Ver.3.09 Data : Mar.24.2008 17 page of 50 42h (B) Copyright 2008...
Page 17
• When the disc does not set to DVD mechanism and disc loading process does not finish, group number, title number, track number, and chapter number are set (' 0 ' ) . • When the disc does not set to DVD mechanism and disc loading process does not finish, elapsed time information are set ( ' 0 ' ) .
• This command is valid only when the status data is Play (E) . • This command is valid as step mode, when the status data is Pause (F) . • When status code is 4Bh (DIR mode) , this command is not accepted.
(F) . • The unit can skip to a maximum track with Forward and to a minimum track with Reverse (–) and when it goes to more than those track, the Order Track None answer code is issued. Copyright 2008...
• To make the search speed what you want , it needs to send some this command. Example : Now it 's plaing . If you make the search speed to FF X 6 , it needs to send this command 3 times.
BCCH ( high-level ) BCCL ( low-level ) Special conditions • This command is valid only when the mode status is Stop (B) . • When status code is 4Bh (DIR mode) , this command is not accepted. Copyright 2008...
BCCH ( high-level ) BCCL ( low-level ) Special condition • This command is valid only when disc type code is DVD-Video (1) or DVD-Audio (2) . • When status code is 4Bh (DIR mode) , this command is not accepted. Copyright 2008...
Answer code ETX (03h) BCCH (high-level) BCCL (low-level) Special condition • This command is valid only when disc type code is DVD-Video (1) . • When status code is 4Bh (DIR mode) , this command is not accepted. Copyright 2008...
Answer code ETX (03h) BCCH (high-level) BCCL (low-level) Special condition • This command is valid only when setup menu or display menu is displayed. • When status code is 4Bh (DIR mode) , this command is not accepted. Copyright 2008...
Special condition • When status code is 4Bh (DIR mode) , this command is not accepted. • When the value of the "current subtitle stream channel( both digit10 and digit1 )" is zero, it means the subtitle is OFF. Copyright 2008...
Answer code Current angle stream channel Total angle stream channel ETX ( 03h ) BCCH ( high-level ) BCCL ( low-level ) Special conditions • When status code is 4Bh (DIR mode) , this command is not accepted. Copyright 2008...
Chapter number or track number (10 digit) Chapter number or track number (1 digit) ETX ( 03h ) BCCH ( high-level ) BCCH ( low-level ) Special conditions • When status code is 4Bh (DIR mode) , this command is not accepted. Copyright 2008...
\ bit STX (02h) Reply code 'N ' ) Answer code ETX ( 03h ) BCCH ( high-level ) BCCH ( low-level ) Special conditions • When status code is 4Bh (DIR mode) , this command is not accepted. Copyright 2008...
Panel µ-con version number (10 digit) Panel µ-con version number (1 digit) ETX ( 03h ) BCCH ( high-level ) BCCH ( low-level ) Special condition • This command is valids only when system status is except 'System Initialize Copyright 2008...
Ver.3.09 Data : Mar.24.2008 40 page of 50 1.9.24 Request Disc status This obtains the information on the disk number reproduced now and each disk. byte \ bit STX ( 02h ) Command code ( ' 3 ' ) Reserve...
Data : Mar.24.2008 41 page of 50 1.10 Extention Command specification • These Commands are extended to make it more convenient than Version 1.0. • It makes control as same buttons of REMOTE CONTROLLER. 1.10.1 OPEN/CLOSE This command can control Disc Tray.
Ver.3.09 Data : Mar.24.2008 42 page of 50 1.10.3 HDMI Selsect This command can change the YCbCr format or RGB format of HDMI. byte \ bit STX ( 02h ) Command code ( ' c ' ) Reserve (00h) Reserve...
Ver.3.09 Data : Mar.24.2008 43 page of 50 1.10.5 PROGRAM/DIRECT This command can change the Play Mode. byte \ bit STX ( 02h ) Command code ( ' e ' ) Reserve (00h) Reserve (00h) Reserve (00h) Reserve (00h) Reserve...
ETX ( 03h ) BCCH ( high-level ) BCCH ( low-level ) 1.10.12 MARKER This command can show the Marker information on screen display. Byte \ bit STX ( 02h ) Command code ( ' l ' ) Reserve (00h)
BCCH ( high-level ) BCCH ( low-level ) 1.10.16 PURE DIRECT This command can select the mode or show the memory of pure direct. Byte \ bit STX ( 02h ) Command code ( ' p ' ) Pure Direct code...
( *1) Transfer Mode code Code Transfer Mode One Time Auto 1.10.18 FUNCTION I carry out a function peculiar to a disk. byte \ bit STX ( 02h ) Command code ( ' r ' ) Function code (*2) Reserve...
Ver.3.09 Data : Mar.24.2008 50 page of 50 1.10.19 (Picture-in-Picture) I perform a change of a Primary stream / Secondary stream / picture-in-picture. byte \ bit STX ( 02h ) Command code ( ' s ' ) Reserve (00h) Reserve...