Denon 3800BDCI - DVD Blu-Ray Disc Player Operating Instructions Manual page 38

..
Function Setup
Menu
I Setting items
I
Options
,
Descriptions
I
Channel Level Test Tone: Off*
Select
"Off"
to deactivate
Tests or sets the ''Test Tone" is the test
the "Test Tone" feature.
volume for each tone which can be out
Select "Manual", then
speakers.
put from the speakers
Manual
press [ENTER] to manually
so that you can adjust
set the volume for the
the volume for each
desired speaker.
speaker.
Auto
Select "Auto",then press
[ENTER] to automatically
out put the test tone from
each speakers.
Front Lch
o
dB to-12 dB If you have selected
(OdB*) "Manual" in ''Test Tone",
Center
o
dB to-12 dB
select the desired speaker
(OdB*)
to set and adjust the
o
dB to-12 dB
volume for the selected
Front Rch
speaker.
(OdB*)
If you have selected
Surround Rch
OdBto-12 dB
"Auto" in ''Test Tone", test
(OdB*)
tone will be output
Surround Back Rch
o
dB to-12 dB
automatically in order.
(OdB*)
Adjust the volume of the
Surround Back Lch
o
dBto -12 dB
speaker that output the
(OdB*)
test tone.
Surround Lch
OdBto-12 dB
(OdB*)
Subwoofer
o
dBto -12 dB
(OdB*)
Set "On" to increases the
SW+ 10dB
On/Off*
volume level that is output
(Not available for HDMI)
from the subwoofer by 10
dB.
Function Setup
Menu Setting items
I
Options Descriptions
Delay Time Distance
Set the desired measure
This is a parameter
Feet*
system. This measure system
for optimizing the
will be used for "Delay Time"
timing at which the
Meters
setting. Press [ENTER] to
sound is output from
switch the setting.
the speakers
Front Lch
Oft - 60ft (12ft*) Select the distance from the
according to their
(Om-18m (3.6m*))
listening point to the
distance from the
Front Rch
Oft - 60ft (12ft*)
speaker to get the ideal
listening position.
(Om-18m (3.6m*))
delay time.
Center Oft -
60ft
(12ft*)
(Om-18m (3.6m*))
Surround Lch Oft -
60ft
(1 Oft*)
(Om-18m (3.0m*))
Surround Rch Oft -
60ft
(1 Oft*)
(Om-18m (3.0m*))
Surround Back Lch
Oft -
60ft
(1Oft*)
(Om-18m (3.0m*))
Surround Back Rch
Oft - 60ft (1 Oft*)
(Om-18m (3.0m*»
Subwoofer
Oft -
60ft
(12ft*)
(Om-18m (3.6m*»
Default
Select "Default", then press
[ENTER],
to reset the "Delay
Time" setting to the default.
• Settings with (*) are the default.
• For HDMI, "None" and
"Off'
options for "Speaker Configuration" are not available.
• For "Delay Time", the difference among the value of the each speaker cannot exceed 15 ft (4.5m).
35
ENGLISH