Virtual Surround; Pure Direct Mode; Setting The Bd Audio Mode - Denon 3800BDCI - DVD Blu-Ray Disc Player Operating Instructions Manual

..
Playback
I
setting the BOAudio Mode
I
I
BO-V
I
BD audio mode is to choose between two ways; you could output
the secondary and interactive audio accompanied by the primary
audio or you could output the primary audio only. Depending on
the setting of the mode, Dolby Digital, DTS, Dolby Digital Plus,
Dolby TrueHD, or DTS-HD output changes between Multi LPCM
and bitstream.
1) In stop mode with BD inserted, press [MODE].
2) Use [b. I V] to select desired setting.
• "Mix Audio Output l l
If it is available, BD video's secondary and interactive audio will be
output with the primary audio.
• The secondary audio is the audio for the sub picture
(Director's comment etc.) and the interactive audio is the
audio for the interactive application (Button click sounds
etc.).
• "HO Audio Output"
Only the primary audio will be output. Set this mode in order to
output Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS or
DTS-HD sound of BD through HDMI connection.
3)
Press [RETURN] to exit.
• You can also set "BD Audio Mode" from the setup menu.
Refer to page 32.
"Video Off"
"Display Off"
I
BO-V
I
IOVD-VIIOVD-VRI
I
CO II
MP3
II
WMA
I
IOivX·1
Use this function to shut down unused circuitry to achieve high
quality analog sound.
1) Press [PURE DIRECT] repeatedly to select your desired pure
direct mode•
• Each time you press [PURE DIRECTI, the pure direct mode
changes as "Normal" .. "Video Off' .. "Display Off' ..
"All Off' .. "Normal". The modes will be displayed on the
front panel display.
Video
1
audio outputs for each mode
"Normal" Normal playback mode (pure direct mode
is off).
Video signal will not be output.
Circuitry for front panel display and
indicators will be shut down.
Video signal will not be output and
circuitry for front panel display and
indicators will be shut down.
1111
011
•
I
2) Use [b.1 VI to select"1" (Natural effect), "2" (Emphasized
effect) or
"Off".
3)
Press [RETURNI to exit.
I
BO-V Ilovo-vllovo-vRI
You can enjoy stereo phonic virtual space through your existing
2-channel stereo system.
1) In stop mode, press [MODE] repeatedly until the virtual
surround setting appears.
I'
Virtual Surround
I
P~rt!l)ir.~Mode
[b.IV
1<l/1>1
[PURE DIRECT]
About the button names in this explanation
< >:
Buttons on the main unit
[ 1:
Buttons on the remote control
Button name only:
Buttons on the main unit and remote control
Playback
23
ENGLISH