Remote Access Code - AT&T CL84100 User Manual

Telephone settings
Answering system settings (handset only)
6. Press /SELECT to confirm your setting and you hear a confirmation
MENU
tone. Press
NOTE: If you subscribe to voicemail service through your telephone service provider, see
Answering system and voicemail on page 59.

Remote access code

To access your answering system remotely from any touch-tone phone, you
need to enter a two-digit number (00-99). Unless you change it, the remote
access code is 19.
To change the remote access code:
1. When the handset is in idle mode, press MENU/
enter the main menu.
2. Press qCID or pDIR to scroll to >Answering sys, then
press /SELECT.
MENU
3. Press qCID or pDIR to scroll to >Ans sys setup, then
press /SELECT.
MENU
4. Press qCID or pDIR to scroll to >Remote code, then
press /SELECT.
MENU
5. Use the dial pad to enter a
/DELETE to backspace and delete a digit.
MUTE
/SELECT to confirm your setting and you hear a
6. Press
MENU
confirmation tone. Press
OFF/
to cancel.
CLEAR
two-digit number. Use
OFF/
to cancel.
CLEAR
22
Play messages
to
SELECT
Answering sys
>
Ans sys setup
>
-End of list-
Remote code
>
Msg alert tone
REMOTE CODE
19