Key Tone; Set Date/Time - AT&T CL84100 User Manual

Telephone settings
Handset settings
NOTES:
1. Your telephone service provider voicemail might alert you to new messages with a stutter
(broken) dial tone. Contact your telephone service provider for more details.
2. For information about using your voicemail service, contact your telephone service provider
for assistance.
�ey tone
The handset is set to beep with each key press. If you turn off the key tone,
there are no beeps when you press keys.
1. Press MENU/
2. Use qCID or pDIR to scroll to >Settings, then press
/SELECT.
MENU
3. Use qCID or pDIR to scroll to >�ey tone, then press
/SELECT.
MENU
4. Press qCID or pDIR to highlight On or Off.
5. Press /SELECT to save your preference and return to
MENU
the main menu. Press

Set date/time

The answering system announces the day and time of each message prior
to playing it. Before using the answering system, set the date and time as
follows. If you subscribe to caller ID service, the day, month and time are
set automatically with each incoming call. The year must be set so that the
day of the week can be calculated from the caller ID information. You can
turn off the date and time settings of the caller ID service and use your
own settings for each incoming call (see the Use caller ID to automatically
set date and time section on the following page).
After a power failure, handset registration or deregistration, the system reminds
you to set the date and time for backup before entering the idle mode.
Follow the steps below to set the month, day, year and time on the handset.
1. When the handset is in idle mode, press MENU/
enter the main menu.
2. Press qCID or pDIR to scroll to >Settings, then press
/SELECT.
MENU
3. Press qCID or pDIR to scroll to >Set date/time.
4. Press /SELECT twice to select >Date & time.
MENU
5. Press qCID or pDIR to select the month then press
/SELECT, or enter the number using the dial pad keys.
MENU
in idle mode to enter the main menu.
SELECT
OFF/
to cancel.
CLEAR
15

Key tone

>
Set date/time
On
>
to
SELECT
>Set
Home area code
Date & time
>
CID time sync
KEY TONE
date/time