Answer On/Off - AT&T CL84100 User Manual

Telephone settings
Answering system settings (handset only)
To delete your outgoing announcement:
1. When the handset is in idle mode, press MENU/
main menu.
2. Press qCID or pDIR to scroll to >Answering sys, then press
/SELECT.
MENU
3. Press /SELECT again to select >Announcement. The
MENU
system announces, "To play, press 2. To record, press 7."
4. Press 3 to delete your recorded announcement.
When your announcement is deleted, the system answers calls with the
default announcement described on the previous page.

Answer on/off

Unless you change it, the answering system is on and ready to record
messages. You can turn the answering system off, but if you do so, the
answering system does not answer calls and record incoming messages.
To turn the answering system on or off from a cordless handset:
1. When the handset is in idle mode, press MENU/
enter the main menu.
2. Press qCID or pDIR to scroll to >Answering sys, then
/SELECT.
press
MENU
3. Press qCID or pDIR to scroll to >Answer ON/OFF, then
/SELECT.
press
MENU
4. Press qCID or pDIR to highlight On or Off, then press
/SELECT to confirm. You hear a confirmation tone. Press
MENU
OFF/
CLEAR
If the answering system is on, the handset screen shows
ANS ON.
NOTES:
1. If the answering system is off and there is an incoming call, the system answers after 10 rings and
announces, "Please enter your remote access code." For more information about remote access
codes, see page 66.
2. If you change any answering system settings, the system automatically turns on and will answer
incoming calls.
to cancel.
SELECT
SELECT
20
to enter the
Announcement
>
Delete all old
to
Play messages
Answering sys
>
Answer ON/OFF
>
Ans sys setup
ANSWER ON/OFF
>On