Home Area Code; Dial Mode - AT&T CL84100 User Manual
Dect 6.0 corded/cordless telephone/answering system with caller id/call waiting
Hide thumbs
Also See for CL84100:
- User manual (101 pages) ,
- Quick start manual (12 pages) ,
- User manual (101 pages)
Table of Contents
Advertisement
Telephone settings
Handset settings
Home area code
If you dial seven digits to make a local call (no area code required), enter
your area code into the telephone as the home area code. When you receive
a call from within your home area code, the caller ID history only displays the
seven digits of the telephone number.
This feature makes it easy for you to place a call from the caller ID log. If you
dial 10 digits to make a local phone call, do not use this home area code
feature. If you do, you cannot place local calls from your caller ID log, as they
will have only seven digits.
To set the home area code on a cordless handset:
1. Press MENU/
2. Use qCID or pDIR to scroll to >Settings, then press
/SELECT.
MENU
3. Use qCID or pDIR to scroll to >Home area code, then
press
/SELECT.
MENU
4. Use the dial pad keys to enter a three-digit home area
code. Press
MUTE
or press and hold
/SELECT to save and return to the main menu.
5. Press
MENU
There is a confirmation tone. Press
NOTE: If, in the future, your telephone service provider requires you to
dial 10 digits to make a local call (area code plus telephone number), you need to delete
your home area code and dial out locally from the call log. With the home area code
displayed, press and hold X/DELETE until the digits are deleted, and then press
/SELECT. The home area code is now restored to its default setting of _ _ _(empty).
MENU
Dial mode
The dial mode is preset to tone dialing. If you have pulse (rotary) service, you
must change the dial mode to pulse dialing before using the telephone.
To set the dial mode on a cordless handset:
1. Press MENU/
2. Use qCID or pDIR to scroll to >Settings, then press
/SELECT.
MENU
3. Use qCID or pDIR to scroll to >Dial mode, then press
/SELECT.
MENU
4. Use qCID or pDIR to scroll to >Tone or >Pulse, then press
/SELECT. There is a confirmation tone. Press
MENU
OFF/
CLEAR
in the idle mode to enter the main menu.
SELECT
/DELETE to delete a digit while entering,
/DELETE to delete all digits.
MUTE
in the idle mode to enter the main menu.
SELECT
to cancel.
OFF/
to cancel.
CLEAR
17
>Settings
Website
Home area code
>
Dial mode
HOME AREA CODE
___
Dial mode
>
-End of list-
DIAL MODE
>Tone
Advertisement
Table of Contents
