3-2 SmartCraft engine data displays
To display the SmartCraft data, press
select SmartCraft, then press
or to select one of the four SmartCraft displays,
shown below.
For the Small, Medium and Large gauges:
The factory default has gauges appropriate
to the type of engine. To change what gauges
are displayed, see section 3-7: Gauge setup.
If the boat has twin engines, the red needle
Small: Six small 'analogue' gauges:
Large: Two large 'analogue' gauges
10
and
,
or
Each display has three items of header data. To
select what data is displayed, see section 3-7:
Header setup.
Medium: Two medium & two small 'analogue'
gauges
Header
data
Tanks: Tank levels (see next page)
NAVMAN
or number shows port data, green shows
starboard data.
The gauges can be set up to be analogue
(dial) or digital (number) (see section 3-7:
Gauge type and Speed range).
SmartCraft gateways Installation and Operation Manual