Operation With A Navman Fish 4600 - NorthStar SMARTCRAFT GATEWAY Manual

5 Operation with a Navman FISH 4600

Before a SmartCraft gateway is connected, the FISH 4600 functions normally, with no SmartCraft functions.
When a SmartCraft gateway is connected and SmartCraft is turned On (see section 5-1), SmartCraft
functions become available and some standard functions change.
SmartCraft functions
Data displays
Engine performance and tank level displays ............................................................................................. See section 5-2
Troll control
Automatically maintains a set engine idle RPM or idle boat speed ................................................ See section 5-3
Trim indicator
Displays the trim angle when engine trim is adjusted .......................................................................... See section 5-4
Alarms
SmartCraft engine fault alarms ........................................................................................................................ See section 5-5
Engine fault list, a list of active SmartCraft engine fault alarms ......................................................... See section 5-6
Engine fault history, a list of past SmartCraft engine fault alarms .................................................... See section 5-6
Tank low level alarms .......................................................................................................................................See section 5-2-1
Setup data and calibrations
SmartCraft setup data ......................................................................................................................See sections 5-6 and 5-8
SmartCraft calibrations, Tanks, Trim and Steering angle ....................................................................... See section 5-7
SmartCraft setup data and calibrations .....................................................................................See sections 5-7 and 5-1
The SmartCraft data available depends on the engine type and the sensors fitted (see section 1-1).
Changes to standard functions with SmartCraft enabled:
key: When using troll control, pressing
second time to display the normal menu.
Fuel: The fuel display functions normally but with fuel and speed data coming from the SmartCraft
system rather than from separate sensors connected to the FISH 4600.
If there are no optional level sensor(s) fitted to the fuel tanks (see section 1-1-1), then the Smartcraft
fuel flow is used to calculate fuel remaining. The fuel setup data is the same as the standard FISH
4600. You must tell the FISH 4600 when you add or remove fuel (see the FISH 4500/4600 Installation
and Operation manual).
If each fuel tank has an optional level sensor fitted (see section 1-1-1), then these tank levels are used
to calculate fuel remaining. In the Fuel display, Used changes to Trip used, and the only fuel
setup option is Clear trip used. Trip used measures the volume of fuel used until it is reset
to zero by selecting Clear trip used in the fuel setup menu. You do not tell the FISH 4600 when
you add or remove fuel.
Engine hours: Engine hours on the Log display come from the SmartCraft system.
It can not be reset.
Simulate mode: Data from the SmartCraft engine(s) and sensors is simulated. The SmartCraft data
simulated will probably differ from the data available in your system.
For more information, see the FISH 4500/4600 Installation and Operation manual.
SmartCraft gateways Installation and Operation Manual
can display the troll window. Press
NAVMAN
a
27