Operation With A Navman Fish 4380 - NorthStar SMARTCRAFT GATEWAY Manual

3 Operation with a Navman FISH 4380

Before a SmartCraft gateway is connected, the FISH 4380 functions normally, with no SmartCraft functions.
When a SmartCraft gateway is connected and SmartCraft is turned On (see section 3-1), SmartCraft
functions become available and some standard functions change.
SmartCraft features
Data displays
Engine performance and tank level displays ............................................................................................. See section 3-2
Troll control
Automatically maintains a set engine idle RPM or idle boat speed ................................................ See section 3-3
Trim indicator
Displays the trim angle when engine trim is adjusted .......................................................................... See section 3-4
Alarms
SmartCraft engine fault alarms ........................................................................................................................ See section 3-5
Engine fault list, a list of active SmartCraft engine fault alarms ......................................................... See section 3-6
Engine fault history, a list of past SmartCraft engine fault alarms .................................................... See section 3-6
Tank low level alarms ........................................................................................................................................... See section 3-2
Setup data and calibrations
SmartCraft setup data .......................................................................................................................See sections 3-1 and 3-7
SmartCraft calibrations, Tanks, Trim and Steering angle. ................................................... See section 3-8
The SmartCraft data available depends on the engine type and the sensors fitted (see section 1-1). To disable
the SmartCraft functions, turn SmartCraft to Off (see section 3-1); the instrument will now use any
Navman fuel sensors which are connected.
To use the SmartCraft functions and not the sonar functions, turn Sonar to Off (see section 3-1).
Changes to standard functions with SmartCraft
key: When using troll control, pressing
second time to display the normal menu of options.
Fuel display: The fuel display functions normally, with fuel and speed data coming from the Smart-
Craft system rather than from separate sensors connected to the FISH 4380.
Fuel setup options:
If no fuel tanks have an optional level sensor fitted (see section 1-1-1), then the Smartcraft fuel flow is
used to calculate fuel remaining. The fuel setup data is the same as the standard FISH 4380. You must
tell the FISH 4380 when you add or remove fuel (see the FISH 4380 Installation and Operation manual).
If each fuel tank has an optional level sensor fitted (see section 1-1-1), then these tank levels are used
to calculate fuel remaining. In the Fuel display, Used changes to Trip used, and the only fuel
setup option is Clear trip used. Trip used measures the volume of fuel used until it is reset
to zero by selecting Clear trip used in the fuel setup menu. You do not tell the FISH 4380 when
you add or remove fuel.
Engine hours: Engine hours on the Log display come from the SmartCraft system.
It can not be reset.
Simulate mode: Data from the SmartCraft engine(s) and sensors is simulated in Simulate mode. The
SmartCraft features simulated will probably differ from the features available in your system.
For more information, see the FISH 4380 Installation and Operation manual.
8
can display the troll window. Press
NAVMAN
SmartCraft gateways Installation and Operation Manual
a