Configuring The Application Server And Md Vcenter Plug-In - Dell PowerVault MD3060e Installation And Configuration Manual

Configuring the Application Server and
MD vCenter Plug-in
Once the application server and MD vCenter Plug-in are installed, verify that the MD vCenter Plug-in is
successfully registered with the vCenter server:
•
Open the vSphere Client
•
From the vSphere Client menu bar, select Plug-ins > Manage Plug-ins
•
The Dell MD Storage Array vCenter Plug-in should be listed as Enabled
If the MD vCenter Plug-in is listed as disabled with an error message indicating that it cannot communicate
with the application server, verify the port number defined for the Jetty server is enabled to pass through any
firewalls in use. The default Jetty TCP port numbers are
The MD vCenter plug-in icon should also appear in the Solution and Application section of the vSphere Client
home page.
Figure 2. vSphere Client Home Page
and .
8084 8081
Dell MD Storage Array vCenter Plug-in
2
| 9