Dell PowerVault MD3060e Installation And Configuration Manual page 24

3
In the Commands section, click Automatically Save Configuration.
The Automatically Save Configuration dialog box appears.
4
Check Enable automatic save configuration.
5
Click OK to enable automatic configuration backups.
Once automatic configuration backups are enabled, they are persisted between restarts of the MD
vCenter Plug-in application server and vCenter Server. To disable automatic save configuration, clear
the selection box.
Figure 16. Automatic Save Configuration Message
NOTE: The automatic backup script files are located in C:\Program Files (x86)\Dell\MD Storage
Array vCenter Plug-In\jetty\savecfg directory.
Initiate A Manual Save Configuration
To perform a manual save configuration:
1
Open the Storage Array Manager View.
2
In the left pane, click the storage array name.
The storage array properties are displayed in the right pane.
3
In the right pane, click Manually Save Configuration.
The Manually Save Configuration dialog box appears.
Figure 17. Manually Save Configuration Message
Dell MD Storage Array vCenter Plug-in | 24