The Policy Manager server requires initial port configuration. Its backplane contains three ports.
Server Port Overview
Figure 1:
Policy Manager Backplane
The ports in the figure above are described in the following table:
Table 1:
Device Ports
Key
Port
A
Serial
B -
Management
eth0
(gigabit Ethernet)
C -
Data (gigabit
eth1
Ethernet)
Dell Networking W-ClearPass Policy Manager 6.0 | User Guide
Description
Configures the ClearPass Policy Manager appliance initially, via hardwired terminal.
Provides access for cluster administration and appliance maintenance via web
access, CLI, or internal cluster communications.
Configuration required.
Provides point of contact for RADIUS, TACACS+, Web Authentication and other data-
plane requests.
Configuration optional. If not configured, requests redirected to the management
port.
Chapter 2
Powering Up and Configuring Policy
Manager Hardware
13