Before You Install The Md Vcenter Plug-In - Dell PowerVault MD3060e Installation And Configuration Manual

Application Server Requirements
The Windows-based application server configured with vCenter Client should be installed on a separate server
installation than the one running vCenter Server. While it is possible to install the application server and
vCenter Server on the same host, it is not recommended.

Before You Install the MD vCenter Plug-in

Before installing the MD vCenter Plug-in, you need to know some specific information about your storage
array and network configuration. The following table shows the information you will need.
Table 2. Storage Array and Network Information
Gather this information about your specific environment before installing the MD vCenter Plug-in:
Component
vCenter Server
vCenter Administrator
Storage Administrator
Application Server
MD Storage Array
MD Storage Array
Information Needed
Host Name:
DNS Names:
IP Addresses:
Username:
Password:
Username:
Password:
Host Name:
DNS Names:
IP Addresses:
Array Name:
Password:
IP Addresses:
Array Name:
Password:
IP Addresses:
Dell MD Storage Array vCenter Plug-in | 7