Remote Replication - Dell PowerVault MD3060e Installation And Configuration Manual

Figure 37. Virtual Disk Copy Target Dialog
After the virtual disk copy is established, it can be managed from the Virtual Disk Copy tab. To stop a copy
operation that is occurring, select the copy set to modify and click Stop. To recopy an existing virtual disk,
click the copy set and click Recopy. To delete a copy set, select the copy set to modify and click Remove
Copy. This removes the virtual disk copy relationship between the two virtual disks, but does not modify or
delete the target virtual disk that still contains a copy of the original data from the source virtual disk.

Remote Replication

When the Remote Replication premium feature is enabled on the MD storage array, the Remote Replication tab
appears in the MD vCenter Plug-in. From this tab, existing remote replication pairs are displayed which allows
for creation of new replication pairs, suspending an existing replication pair, resuming a replication pair,
removing a replication pair, testing replication communications, or changing replication parameters.
Dell MD Storage Array vCenter Plug-in | 48