Dell PowerVault MD3060e Installation And Configuration Manual page 49

Figure 38. Remote Replication View
Create Remote Replication
Use these steps to create remote replication using the MD vCenter Plug-in.
NOTE: To create remote replication, both storage arrays (local and remote) must be added to the Array
Manager view.
1
From the Remote Replication tab, click Create Remote Replication.
2
Click Next.
3
From the Virtual Disk tree view, select the source virtual disk for the replication and click Next.
4
Select the remote storage array for the replication.
5
From the drop-down list, select the secondary virtual disk to be the target of the source remote
replication.
6
Choose the write mode for the remote replication and click Next.
7
Review the summary information on the Confirmation page and click Finish to establish the replication.
Dell MD Storage Array vCenter Plug-in | 49