Enclosure Status
After selecting this option you can either view the Enclosure Status or view/configure the enclosure
slots. Before you can use the auto hot plug with a SAF-TE subsystem, you must configure the
subsystem (more precisely its intelligence, the so-called SEP SAF-TE Enclosure Processor). See
Figure 45.
✏
NOTE
Non-initialized disks cannot be configured as no RAID configuration information can be stored on
these disks.
To assign a specific hard disk drive to a SAF-TE enclosure slot, press <Enter> on the empty slot
and choose one of the hard disk drives. See Figure 46.
Storage Console
Figure 45. Enclosure Status
Figure 46. Enclosure Slots
109