6.4 Installing Usb Devices Under The Front Plate; Figure 19 -- J2 (Usb Header) And J3 (2X3) Pin Header, View From The Back Of Enclosure; Figure 20 -- Removing The Front Plate By Pressing The Left And Right Plastic Lids; Figure 21 -- Jp1, Jp2 Pin Header And 2 X Usb Slots - Intel Atom D2700 User Manual

Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User's Manual
Figure 19 -- J2 (USB Header) and J3 (2x3) pin header, view from the back of

6.4 Installing USB devices under the front plate

The face plate is designed to conceal USB flash drives, Bluetooth, USB WIFI modules or
other USB devices. To add a USB device under the front plate, remove it by carefully
pressing outwards and gently pushing, one by one, the plastic lids from the sides (see
Figure ).
20
Figure -- Removing the front plate by pressing the left and right plastic lids
20
Near the front USB connector there are 2 jumpers (pictured in Figure
to customize how the board will start.
JP1: Disable On/Off power button (removing this jumper disables the power button).
JP2: Enable auto start (set power button on ―ON‖ state always).
Figure
Download from Www.Somanuals.com. All Manuals Search And Download.
Enclosure
-- JP1, JP2 pin header and 2 x USB slots
21
Front view of the enclosure, with the front plate removed.
) which are used
21
86