Build/Rebuild Progress; Create New Array Drive - Intel SRCU31A - Server RAID U3-1A Controller User Manual

Build/Rebuild Progress

Whenever an array drive is in the build or rebuild state, you can select "Build/Rebuild Progress" to
get progress information and estimates for the required time to build or rebuild.

Create New Array Drive

In Advanced Setup, select "Configure Array Drives" and press <Enter>. The Select Array Drive
window appears. StorCon lists all logical drives which are free (not yet part of an array or host
drive). The selection bar is moved with the arrow up/down keys and a logical drive is
selected/deselected with the space bar.
For a striping array (RAID 0, 4, 5, 10), the master drive (indicated by "M") is the first logical drive
in the array (see Figure 59). For a RAID 1 array (mirroring) the master drive is the first logical
drive in the array that contains the valid data copied to the second logical drive.
118
Figure 57. Create New Array Drive
Intel RAID SRCU31 Users Guide