Installing The Sas Backplane - Dell DX6000G Hardware Owner's Manual

Figure 3-25. Removing and Installing a SAS Backplane
1
1 backplane retention latches (2)
3 SAS A cable
5 SAS B cable

Installing the SAS Backplane

CAUTION:
Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.
1 To install the SAS backplane, lower the backplane into the system, being
careful to avoid damaging components on the face of the board.
2
3
2 SAS backplane power cable
4 SAS backplane
Installing System Components
4
5
131