Canceling/Changing Timer Recording Program - JVC SR-9090U - High Resolution 960 Hour Density Instructions Manual

6 RECORDING
6-3 Timer Recording
REC STOP REC
CHECK
REW REVERSE PAUSE PLAY FF
TRACKING
–
FIELD REV FIELD ADV
[TIMER] button
Canceling/Changing Timer Recording
Program
To stop timer programming before finishing
1
Press the [RESET/CANCEL] button.
[The program being set is canceled.
2
Press the [MENU] button twice.
[The normal screen mode is restored.
To cancel preset timer programs
1
Press the [TIMER] button so that the TIMER indication
goes out on the display.
2
Turn on the VCR and monitor.
3
Press the [MENU] button to show the main menu screen
and press the [SHIFT 7] button to select <PROGRAM
TIMER> or <HOLIDAY SET>. Then, press the [SET +/–]
button.
[The <PROGRAM TIMER> or <HOLIDAY SET> menu
is shown on the monitor.
4
Press the [SHIFT 7] button or [SHIFT f] button to move
the cursor to the program you want to cancel.
5
Press the [RESET/CANCEL] button.
[The specified timer recording program is canceled.
6
Press the [MENU] button twice.
[The normal screen is restored.
36
OPERATE
HDR
RESET/
CANCEL ON SCREEN
SHIFT
MENU TIME MODE
V. LOCK TIMER SEARCH DISPLAY LOCK CNT RESET
+ – + –
S E T
[SHIFT 7] button
[RESET/CANCEL] button
SR-9090U
REC
EJECT OPERATE
+
[MENU] button
To modify timer programs
1
Press the [TIMER] button so that the TIMER indication
goes out on the display.
2
Turn on the VCR and monitor
3
Press the [MENU] button to show the main menu screen
and press the [SHIFT 7] button to select <PROGRAM
TIMER or <HOLIDAY SET>. Then, press the [SET +/–]
button.
[The <PROGRAM TIMER> or <HOLIDAY SET> menu
is shown on the monitor.
4 Press the [SHIFT 7] button or [SHIFT f] button so that
the section you want to change blinks.
5
Press the [SET +/–] button to change the value.
6
Press the [MENU] button twice.
[The normal screen is restored.
To use the VCR when the Timer-Recording
Standby mode is engaged
• Press the [TIMER] button so that the TIMER indication
goes out. After using the VCR, press the [TIMER] button
again to engage the Timer-Recording Standby mode. The
TIMER indication will light.
• When all timer recording programs are completed, the
TIMER indication goes out.
RESET/
CANCEL ON SCREEN
SHIFT
TIME MODE
MENU
+
–
S E T
[SET –] button
[SHIFT f] button
[SET +] button