JVC SR-9090U - High Resolution 960 Hour Density Instructions Manual page 25

4 ON-SCREEN/MENU SWITCHES
4-7 Contents of Menu Switches
[ ]: Factory setting • The lower section in the items and set values columns shows what's on the VCR's display.
Screens Items
VTR MODE REPEAT REC
(VCR's display)
VTR 7
SRI/EXT SRI/EXT REC
MODE
SR ET 1
EXT REC END
SR ET 2
CNT TAPE END [OFF]
SR ET 3
ALARM/ REC MODE
SENSOR
MODE
AL SE 1
REC SPEED
AL SE 2
Set values
Enables or disables the repeat recording function.
[OFF]
OFF: The repeat recording function is disabled.
ON
ON: When the tape ends, it is automatically rewound and recording
OFF
starts again from the beginning. When set to "ON", the [REPEAT]
ON
indication on the VCR's display lights.
* If the menu switch <TAPE END MODE> on the <ALARM/SENSOR
MODE> screen is set to "STOP", the Stop mode is engaged when
the tape ends even when there is an alarm or sensor recording. The
repeat recording is not executed.
* When this menu switch is set to "ON", externally activated recording
is not executed.
Selects series recording or automatic recording with an external VCR activation
[OFF]
signal.
SERIES
OFF: The series recording and automatic recording with an external
EXT
signal functions are disabled.
OFF
SERIES: The series recording function is enabled.
SERi
EXT: The automatic recording function with an external signal is enabled.
EiT
* When the menu switch <REPEAT REC> is set to "ON", externally
activated recording is not executed.
Selects the mode engaged when externally activated automatic
[NORMAL]
recording ends.
OPE OFF
NORMAL: The Stop mode is engaged.
NORn
OPE OFF: The Stop mode is engaged and the operating power mode
POFF
is turned off.
Outputs a tape end signal from the rear panel's [TAPE END OUT] terminal
500 when the tape reaches the set tape reel counter value during recording.
During series recording, a series recording signal is output to a connected
1000
. .
VCR for continuous recording.
.
OFF: The counter end output function is disabled.
9500
500 : A tape end signal is output when the set tape reel counter value is
OFF
. . reached during recording. A buzzer sounds when the menu switch
.
500
<END BUZ> on the <BUZZER/IN OUT> is set to "ON".
9500
. .
For more information on the relationship between the tape reel
.
9500
counter value and the tape remaining time, refer to page 64.
[OFF] Selects the alarm recording or sensor recording function.
ALARM • Alarm recording: When an alarm signal is input to the rear panel's
SENSOR [ALARM IN] terminal during recording, the mode switches to the 2H (SP)
ALL or 6H (EP) recording mode for realtime recording of the alarm event.
• Sensor recording: When an alarm signal is input to the rear panel's
OFF
[ALARM IN] terminal in the Stop mode (Stop mode, Timer Recording
ALAR
Standby or Operating Off mode), recording starts in the 2H (SP) or 6H
SENS
(EP) mode.
ALL
OFF: Alarm or sensor recording is not executed.
ALARM: Alarm recording is executed.
SENSOR: Sensor recording is executed.
ALL: Both alarm and sensor recording are executed.
[2H] Selects the recording mode for alarm or sensor recording.
6H 2H: Records in the 2H (SP) mode.
6H: Records in the 6H (EP) mode.
2H
6H
Function
25