Alarm Scan - JVC SR-9090U - High Resolution 960 Hour Density Instructions Manual

7 PLAYBACK AND SPECIAL-EFFECTS PLAYBACK
Alarm scan screen
A L A R M : S C A N 0 1 *
0 0 H 0 0 M 0 1 S * * F R
A
L – 0 5 6 * B L P L – 0
* Z O O M O N U M . * * *
Control or reel counter
* M A C R * * T E L E * *
* D A T E E H E U R E * *
* D U R E * * B A N D E *
* * * * * * * * * * * *
*
* * * * * * * * * * * * *
* * * * * * * * * * * * *
* * * * * * * * * * * * *
* 4 F I N D E * M E N U
Date/time search setting screen
"Day" setting
T D A S R H S 0 1 D 0 0 H
0 0 H 0 0 M 0 1 S * * F R
– – – – – 6 – – : – – – 0
* Z O O M O N U M . * * *
* M A C R * * T E L E * *
* Search data during tape D A T E E H E U R E * *
* D U R E * * B A N D E *
running (month, day,
* * * * * * * * * * * * *
hour, minute)
* * * * * * * * * * * * *
* * * * * * * * * * * * *
* * * * * * * * * * * * *
* 4 F I N D E * M E N U
VCR's display
"Day" setting
T D A S R F S 1 2 D 1 9 H
0 0 H 0 0 M 0 1 S * * F R
1 0 – 1 0 6 1 5 : 3 0 – 0
* Z O O M O N U M . * * *
* M A C R * * T E L E * *
* D A T E E H E U R E * *
* D U R E * * B A N D E *
* * * * * * * * * * * * *
* * * * * * * * * * * * *
* * * * * * * * * * * * *
* * * * * * * * * * * * *
* 4 F I N D E * M E N U
50
* * * * * * * * * * *
I * * * * * * * * * *
4 * A U T O * * * * *
* * M . * * * * * * *
* * A . * * * * * * *
* * * * * * * * * * *
* * T 4 5 * * * * * *
* * * * * * * * * * *
* * * * * * * * * * *
* * * * * * * * * * *
* * * * * * * * * * *
* * * * * * * * * * *
"Time" setting
* * * * * * * *
* * *
I * * * * * * * * * *
4 * A U T O * * * * *
* * M . * * * * * * *
* * A . * * * * * * *
* * * * * * * * * * *
* * T 4 5 * * * * * *
* * * * * * * * * * *
* * * * * * * * * * *
* * * * * * * * * * *
* * * * * * * * * * *
* * * * * * * * * * *
"Hour" setting
Set value
* * * * * * * * * * *
I * * * * * * * * * *
19:00 on 12
4 * A U T O * * * * *
* * M . * * * * * * *
Search data
* * A . * * * * * * *
during tape
* * * * * * * * * * *
running
* * T 4 5 * * * * * *
* * * * * * * * * * *
(15:30 on
* * * * * * * * * * *
Oct. 10)
* * * * * * * * * * *
* * * * * * * * * * *
* * * * * * * * * * *

Alarm scan

The section around the start of each alarm recording is played back for
about 5 seconds.
* Playback may start a few seconds after the actual start of the alarm
recording.
* If the interval between alarm recordings is short, the tape may play
back continuously for 5 seconds or more.
* Sound is not output.
1
Press the [SEARCH] button twice in the Stop mode.
[The Alarm Scan mode is engaged and the [ALARM SCAN] indication
is shown on the monitor screen. The [ALSC] indication is shown in
the display's record/playback speed mode indication section.
* To release the Alarm Scan mode, press the [SEARCH] button twice.
2
Press the [FF] or [REW] button.
[The VCR fast-forwards or rewinds the tape from the current
position and the section around the start of each alarm recording
is played back for about 5 seconds.
3 Press the [PLAY] button when you want to start playback.
[Normal playback starts and the Alarm Scan mode is canceled.
• To cancel alarm search or alarm scan, press the [STOP] button,
[PLAY] button, [REVERSE] button or the [REW]/[FF] button
(whichever is opposite to the current tape running direction).
• When the end or beginning of the tape is reached during
alarm search or alarm scan, the mode is canceled and the
Stop mode is engaged.
Date/time search
A section recorded at a specified date and time is searched and the
Stop mode is engaged.
1
Press the [SEARCH] button three times in the Stop mode.
[The Date/Time Search mode is engaged and the date/time
search setting screen is shown on the monitor.
"td 0100" is shown on the VCR's display.
* To cancel the Date/Time Search mode, press the [SEARCH]
button once.
2
Press the [SET +] or [SET –] button to set the "date" you want to
search (01 - 31).
3
Press the [SHIFT f] button so that "hour" blinks.
4
Press the [SET +/–] button to set the "hour" you want to search (00 - 23).
5
Press the [FF] button or [REW] button.
[The VCR fast-forwards or rewinds the tape from the current
position to search the specified date and time. When the recording
is located, the Stop mode is engaged.
The Date/Time Search mode is canceled.
• During date/time search, the month, day, hour and minute which are
being searched are shown on-screen.
• If the specified date and time cannot be found and the tape ends, the
Date/Time Search mode is canceled and the Stop mode is engaged.
Notes:
• If the specified date and time is near the start of an alarm
recording, the date/time search may not be successful.
• If the specified date/time is the same as the timer-recording start
time, the VCR may not operate correctly.
• Date/time search cannot be executed if no date and time are
available in the search direction.