Table of Contents
Advertisement
– Timer Recording –
A
Press PROG on the Remote to access the Program screen.
B
Press START+/–, STOP+/–, DATE+/–
or PR+/– repeatedly to enter the start
time, stop time, date or channel.
● Press and hold START+/– or
STOP+/– to increase the time in
30-minute intervals.
● To set the tape speed, press SP/EP
(
).
p
● To timer-record daily (Monday–Friday) or weekly serials,
press DAILY or WEEKLY. Pressing the button again makes the
"DAILY" or "WEEKLY" display disappear.
C
Press OK or PROG.
● If "PROGRAM NOT COMPLETED PROGRAM OVERLAP"
appears, see "Program overlap warning display".
D
Press #. The VCR turns off automatically and "
on the display panel.
To use the VCR while it is in timer
recording standby mode
Press #, then press 1. After you use the VCR, press # again to
put the VCR into timer recording standby mode.
PROGRAM 1
START
STOP
– –:– –AM
– –:– –AM
DATE
CH
– –/– –/– –
– – – SP
PRESS (+/–, SP/EP, 8=DAILY
9=WEEKLY), THEN (0K)
PRESS (PROG.) TO END
" is displayed
#
Checking, canceling or changing
program settings
A
Disengage timer
Press #, then press 1.
● When "AUTO TIMER" is set to "ON", you do not have to press
#.
B
Access Program Check screen
Press " (CHECK).
C
Access Program screen
Press " (CHECK) again. Each time you
press " (CHECK), the next program's
Program screen appears.
D
Cancel or change program setting
To cancel a program, press & (CANCEL) when the Program
screen you do not want is shown.
To change a program, press the appropriate button: START+/–,
STOP+/–, DATE+/–, PR+/–, and/or SP/EP (
Program screen on which you want to make changes is shown.
E
Return to normal screen
Press " (CHECK) repeatedly until no Program screen is shown.
F
Reengage timer recording standby mode
Press #. The VCR turns off automatically and "
the display panel.
● When "AUTO TIMER" is set to "ON", the timer recording
standby mode automatically resumes when you turn off the
VCR.
PR START
STOP
CH
DATE
1
8:00P
10:00
12
12/24
2 10:00A
10:45
40
12/25
3
11:30P
1:00 125
12/25
4
5
6
7
8
PRESS (CHECK) TO NEXT
PROGRAM 1
START
STOP
8:00 PM
10:00 PM
DATE
CH
12/24/00
12 SP
PRESS (CANCEL) TO CANCEL
PRESS (CHECK) TO NEXT
) when the
p
" is displayed on
#
Advertisement
Table of Contents
