Location And Functions Of Parts And Controls; Front Panel/Top Panel/Bottom Panel; Right Side Panel (Control Panel) - Sony DXC-390 Service Manual

Location and Functions of Parts and Controls

Front Panel/Top Panel/Bottom Panel

1 Lens mount
8
(GB) Chapter 1 Overview

Right Side Panel (Control Panel)

8 FLANGE BACK (flange focal
length) adjustment ring
DXC-390/390P
2 Screw holes (M3)
2 Screw holes (M3)
1 MENU button
V
2 /BLACK button
b
/ WHITE button
3
4 BARS button
5 ENTER button
v
6 button
B
7 /FILE SELECT button
1 Lens Mount (C-mount)
Attach a C-mount lens or microscope adaptor.
Note
Be sure to use a lens whose projected part from the lens
mount surface is less than 4.3 mm. Mounting the lens with a
projected part greater than 4.3 mm may damage the internal
mechanism of the camera.
2 Screw holes
Use these holes (M3, depth: 4 mm (
supplied tripod adaptor to the camera for mounting the
camera on a wall, ceiling or tripod.
For how to install the tripod adaptor, see "Mounting on a
Tripod" on page 45.
1 MENU button
Displays the MAIN menu on a monitor screen. Press again
to exit the menu. When a setting menu is displayed, press
this button to return to the MAIN menu.
For menu operations, see "Operation through Menus" on
page 14.
V
2 /BLACK (black balance) button
While the menu is displayed: Moves the menu cursor
upward. Also use this button for an AE window setting,
etc.
While the normal screen is displayed: Activates the
automatic black balance adjustment.
b
3 / WHITE (white balance) button
While the menu is displayed: Increases the setting value or
changes the setting. Also use this button for an AE
window setting, etc.
While the normal screen is displayed: Activates the
automatic white balance adjustment when MODE is set
to AWB in WHITE BALANCE menu.
3
/ inches)) to attach the
16
9
Chapter 1 Overview (GB)
1-5 (E)