Sony DXC-390 Service Manual page 19

Adjusting and Setting with Menus
ENHANCER menu
Adjusts the sharpness of the image outline and the color
tone (hue).
<ENHANCER>
>DETAIL
Setting items in the ENHANCER menu
Setting item
DETAIL
LEVEL
FREQUENCY
LINEAR MATRIX
MODE
TARGET COLOR
24
(GB) Chapter 2 Operation
LINEAR MATRIX
Processes an image with a color matrix to change the
chroma saturation and hue in order to reproduce natural
color.
Selection Function
ON Corrects the color to reproduce natural color.
Color correction does not function. Use when you want
OFF
to process the image.
When you set LINEAR MATRIX to ON, MODE is
displayed. You can adjust the color suitable for an object.
When you set MODE to MANUAL, R. PAINT, G. PAINT
and B. PAINT appear.
Selection Function
STANDARD Normally, select this setting.
R ENHANCE Enhances the red.
B ENHANCE Enhances the blue.
G ENHANCE Enhances the green.
MANUAL Adjusts each color finely.
R. PAINT: Finely adjusts the red in the range from –30
to +30.
G. PAINT: Finely adjusts the green in the range from
–30 to +30.
B. PAINT: Finely adjusts the blue in the range from
–30 to +30.
DXC-390/390P
[A]
ON
+ _
LEVEL 0
FREQUENCY MID
LINEAR MATRIX ON
MODE STANDARD
TARGET COLOR
ALL
Select Back
MENU
Ref. page
Contents of setting
Enables or disables to adjust the 24
sharpness of the image outline.
Adjusts the sharpness of the image 24
outline.
Adjusts the sharpness of the 24
detailed image outline.
25
Enables or disables processing of a
color matrix.
Finely adjusts the color tone. 25
Specifies the color for DETAIL or 25
LINEAR MATRIX adjustments.
DETAIL
Enables or disables adjustment of the sharpness of the image
outline.
Selection Function
ON Enables adjustment of the sharpness of the image
outline.
OFF Disables adjustment of the sharpness of the image
outline.
When you set DETAIL to ON, LEVEL and FREQUENCY
are displayed.
Adjust the sharpness of the image outline in accordance with
your shooting purpose and your taste.
Selection Function
LEVEL Adjusts the level in the range from –127 to +127.
The lower level decreases the sharpness of the image
outline and makes the image softer.
The higher level increases the sharpness of the image
outline and makes the image sharper.
FREQUENCY
Selects the frequency level with which the image
outline is adjusted from LOW (lower frequency level),
MID (middle frequency level) or HIGH (higher
frequency level). Higher setting provides a sharper
outline of detailed images.
TARGET COLOR
Select when adjusting DETAIL or LINEAR MATRIX for a
specific color.
Selection Function
ALL Adjusts DETAIL or LINEAR MATRIX for the whole
image. Normally, set to this position.
IN Adjusts DETAIL or LINEAR MATRIX for a specific
color.
With the RANGE setting you can finely adjust the area
in the range from –10 to +10.
OUT Adjusts DETAIL or LINEAR MATRIX for colors other
than a specified one.
How to specify a color
1
Select IN or OUT and press the ENTER button.
2
Move the cross cursor ( ) appearing in the center of
the screen to the desired color with the
button so that the cross cursor square covers the desired
color, then press the ENTER button.
When you select IN, you can adjust the color indicated
by the cross cursor ( ).
When you select OUT, you can adjust colors other than
that with the cross cursor.
B b V v
, , or
25
Chapter 2 Operation (GB)
1-13 (E)