Location And Functions Of Parts And Controls; Front Panel/Top Panel/Bottom Panel; Right Side Panel; (Control Panel) - Sony DXC-390P Instructions For Use Manual

Location and
Functions of Parts
and Controls
Front Panel/Top Panel/
Bottom Panel
1 Lens Mount (C-mount)
Attach a C-mount lens or microscope
adaptor.
Note
Be sure to use a lens whose projected part
from the lens mount surface is less than 4.3
mm. Mounting the lens with a projected
part greater than 4.3 mm may damage the
internal mechanism of the camera.
2 Screw holes
Use these holes (M3, depth: 4 mm (3/16
inches)) to attach the supplied tripod
adaptor to the camera for mounting the
camera on a wall, ceiling or tripod.
For how to install the tripod adaptor,
see "Mounting on a Tripod" on page 35.
Right Side Panel (Control
Panel)
1 MENU button
Displays the MAIN menu on a monitor
screen. Press again to exit the menu.
When a setting menu is displayed, press
this button to return to the MAIN menu.
For menu operations, see "Operation
through Menus" on page 15.
/BLACK (black balance) button
2 V
While the menu is displayed: Moves
the menu cursor upward. Also use this
button for an AE window setting, etc.
While the normal screen is displayed:
Activates the automatic black balance
adjustment.
/ WHITE (white balance)
3 b
button
While the menu is displayed: Increases
the setting value or changes the setting.
Also use this button for an AE window
setting, etc.
While the normal screen is displayed:
Activates the automatic white balance
adjustment when MODE is set to AWB
in WHITE BALANCE menu.

Location and Functions of Parts and Controls

11