Location And Functions Of Parts And Controls; Front Panel/Top Panel; Rear Panel - Sony DXC-990P Instructions For Use Manual

Location and
Functions of Parts
and Controls

Front Panel/Top Panel

1
2
3
4

Rear Panel

5
MENU
TRIG IN
FILE
SELECT
RGB/SYNC
6
7
VIDEO OUT
DC IN/
VBS
8
9
0
qa
qs
qd
qf
qg
BLACK
BARS
WHITE
qh
ENTER
qj
LENS MENU LOCK
qk
ON
OFF
GEN LOCK ql
REMOTE

Location and Functions of Parts and Controls

1 Boss
Attach the supplied lens mount stopper
to prevent the lens from getting loose.
2 Lens Mount
Attach a zoom lens or microscope
adaptor.
3 Mount lever
Fasten the lens by turning the mount
lever clockwise after attaching the lens.
4 Installation/tripod holes (top
and bottom panels)
Use these holes when attaching the
camera to a wall or ceiling, or a tripod.
1 ", UNC20)
(screw: /
4
5 TRIG IN connector (BNC type)
Connects to a commercially available
slave unit by converting to BNC type in
strobe mode.
6 RGB/SYNC
sub 9-pin)
Outputs RGB signals and their
respective sync signals.
Use the CCXC-9DBS/CCXC-9DD/
CCMC-9DS connecting cable for the
connection with the CMA-D2CE
D2MDCE camera adaptor.
For connection with the CMA-D3CE
camera adaptor, use the CCMC-3MZ
connecting cable.
* CMA-D2CE/D3CE/CCMC-3MZ are intended for
general purpose use. They are not intended for
medical use.
7 LENS connector (6-pin)
Connects to a lens cable when attaching
the zoom lens.
8 VIDEO OUT
(BNC type)
Outputs a composite video signal.
connector (D-
*
/
*
*
connector
11