Disabling User Account Control - Konica Minolta PS5000C MKII Operator's Manual

PS5000C MKII Operator's Manual
2.1

Disabling User Account Control

If the User Account Control is enabled when operating under the Windows Vista or
Windows 7 environments, be sure to disable the User Account Control setting before
starting the setup procedure. After the procedure is completed, be sure to return the setting
to enable.
Be sure to perform the procedure with the authority of the System Administrator.
NOTE !
The following example applies when using a PC running under the Windows Vista
environment.
1
2
3
3-8
Displayed screens may be different depending on the OS of your
•
PC
Be sure to do this procedure with the Scanner in the OFF
•
condition.
Select "Start" and then "Control Panel".
Click "User Accounts" on the "Control Panel" screen.
Type "UAC" in the Search area located in the upper right hand corner and
press "Enter".