Setting The Channel Level - Denon AVR-4802R Operating Instructions Manual

Setting the channel level

• Use this setting to adjust so that the playback level between the different channels is equal.
• From the listening position, listen to the test tones produced from the speakers to adjust the level.
• The level can also be adjusted directly from the remote control unit. (For details, see page 56.)
• When using both surround speakers A and B, their playback levels can be adjusted separately.
1
At the System Setup Menu select "Channel Level".
2
Switch to the Channel Level screen.
3
Select "Test Tone Mode".
4
5
6
Select "Test Tone Start".
Select the mode.
Select "Auto" or "Manual".
• Auto:
Adjust the level while listening to the test tones produced
automatically from the different speakers.
• Manual:
Select the speaker from which you want to produce the test tone to
adjust the level.
Select "Surr. Sp.", then select the surround speaker(s) from which you want to
produce the test tone (A, B or A+B).
• Surr. Sp.: A
Adjusts the balance of the playback level between the channels when using
surround speaker A.
• Surr. Sp.: B
Adjusts the balance of the playback level between the channels when using
surround speaker B.
• Surr. Sp.: A+B
Adjusts the balance of the playback level between the channels when using
surround speakers A and B at the same time.
The "Surr. Sp." can only be selected when both surround speakers A and B have
been selected at the "Speaker Configuration" (when both A and B have been
set to "Large" or "Small").
Example: When the "Auto" mode is selected
23