Setting The Channel Level - Denon AVR-4800 Operating Instructions Manual

Setting the channel level

• Use this setting to adjust so that the playback level between the different channels is equal.
• From the listening position, listen to the test tones produced from the speakers to adjust the level.
• The level can also be adjusted directly from the remote control unit. (For details, see page 46.)
• When using both surround speakers A and B, their playback levels can be adjusted separately.
1 At the System Setup Menu select "Channel Level".
2
Switch to the Channel Level screen.
ENTER
3
Select "Test Tone Mode".
4
Select the mode.
Select "Auto" or "Manual".
• Auto:
• Manual:
5
6
7
Select "Test Tone Start".
Adjust the level while listening to the test tones produced automatically
from the different speakers.
Select the speaker from which you want to produce the test tone to
adjust the level.
Select "Surr. Sp.", then select the surround speaker(s) from which you want to produce the test
tone (A, B or A+B).
• Surr. Sp.: A
Adjusts the balance of the playback level between the channels when using surround speaker
A.
• Surr. Sp.: B
Adjusts the balance of the playback level between the channels when using surround speaker
B.
• Surr. Sp.: A+B
Adjusts the balance of the playback level between the channels when using surround
speakers A and B at the same time.
The "Surr. Sp." can only be selected when both surround speakers A and B have been
selected at the "Speaker Configuration" (when both A and B have been set to "Large" or
"Small").
Select "Back" and make the surround back speaker settings.
Set to "ON" to play using the surround back speaker(s), to "OFF" if you do not want to use the
surround back speaker(s).
This is not displayed if "None" is set for "Surround Sp. Back" at the "Speaker Configuration"
screen.
Example: When the "Auto" mode is selected
25