Ricoh Pro C900 Replacement Manual page 90

u Other Adjustment Settings
SP
1-730 Detect Skew
1-761 Detect Side Regist
1-906 Paper Curl Adjustment
1-908 Erase Paper Lead Edge
1-910 Detect Multi Feed
1-920 Blow Fan Duty Adj.
1-921 Air Feed Start Time Adj.
2-810 Clear blurred img
3-309 Oil removal mode
3-801 Initialize T Sensor
3-820 Execute Density Adj.
6-770 Stacker Full Setting
Item
Use this if the print image is misaligned
by more than 2-3 mm when printing on
color, pre-printed, or narrow sheets up
to 147 mm wide. After disabling "Skew
detection" and "Side-to-Side
Registration" use the "Side-to-Side
Registration1/2" setting to adjust the
alignment.
Specify the method for straightening
curled sheets. Select the method
according to the direction and degree of
curl.
If paper frequently becomes jammed
inside the fusing unit, adjust the paper
edge margin settings. Specify this
setting for each paper type.
If double feeding is erroneously
detected when delivering color, pre-
printed, or other special sheets, disable
double-feed detection.
If double feeding or paper jamming
occurs when using the LCT, adjust the
strength of the sheet separation
airstream. Specify this setting for each
LCT paper tray.
If double-feeds or paper jams occurs
when using the LCT, adjust the duration
of the sheet separation airstream.
Specify this setting for each LCT paper
tray.
Use this to remove dirt from the surface
of the drum unit.
Use this to remove oil from the surface
of the drum unit and image transfer belt.
The machine automatically performs the
initialization process every time the
developer is replaced.
The machine automatically performs the
print density adjustment process.
Specify the height limit of the delivered
paper stack. Select 100%, 75%, 50%,
or 25%.
3. Values for Settings on the [Adjustment] Menu
Description
10
Reference
3.2.4