Ricoh Pro C900 Replacement Manual page 14

INSTALLATION, TCRU SETUP
1. Insert the TCRU SD card into a vacant SD card slot on the back of the machine.
2. After connecting the ground leakage circuit breaker to the machine and fixing
heater, turn the machine on and wait for it to warm up.
3. For users of Pro C900, press the Printer function/[fierydriven] key on the control
panel to display the Main Menu.
Note: The Printer function/[fierydriven] key on the control panel functions as a
toggle to rotate the displays on the LCD: Main Menu > Printer function > Main
Menu.
For users of Pro C900S, press the [Program] key on the control panel to
display the Main Menu.
4. Press the [TCRU] button to display the TCRU Menu.
The TCRU Menu is shown below.
Note: The [Fusing Unit] and [Others] buttons are not to be used in any of the
procedures shown in this manual.
For users of Pro C900, press the Printer function/[fierydriven] key to exit the
Main Menu.
For users of Pro C900S, press the [Program] key. When the Program menu is
displayed, press [Exit] on the top right-hand corner of the menu.
13