Ricoh Pro C900 Replacement Manual page 36

6. Push the developer bottle to in the direction of the arrow (1) until it it can go no
further and locks into place.
7. Open the TCRU display. (See "OPENING THE TCRU DISPLAY".)
8. Press the [Developer] button.
9. Press the [Reset PM Counter Developer:Exhaust] button.
10. If a confirmation message appears, press the [Continue] button.
11. Select the developer you want to replace, and then press the [Continue] button.
12. If a confirmation message appears, press the [Continue] button.
Note: The old developer is discharged.
1
RPG054
35