Problem 12: Difference In Glossiness - Ricoh Pro C900 Replacement Manual

3.1.12 PROBLEM 12: DIFFERENCE IN GLOSSINESS

High glossiness areas
Step 1 Load paper into the paper tray.
You can use A3, SRA A3, DLT, or 12"x18" for test printing.
Step 2 For users of Pro C900, press the Printer function/[fierydriven] key on
the control panel. For Pro C900S, press the [Program] key.
Step 3 Press [Print].
Step 4 Select the tray containing the paper you have loaded in Step 1.
Step 5 Select the black color.
NOTE: You may also print in the other colors. Once you have pressed
the key, you cannot stop the printing.
Step 6 Printing starts automatically.
20 sheets will be printed in the selected color on both sides of the
paper. Then, 3 sheets will be printed in blue on one side of the paper.
The blue color is for checking the image quality.
When the machine has finished printing, "Completed" is displayed.
There is a difference in glossiness.
CAUSE: This is caused by a difference in the amount
of toner on the surface of the fusing belt.
28