Ricoh Pro C900 Replacement Manual page 37

13. After removing the developer, press the [Confirm] button, and then, while
pressing the lock levers on either side of the developer bottle, carefully pull the
bottle toward you.
Important: To avoid developer spillage while handling the developer bottle, always
keep the developer bottle level.
14. Disconnect the developer bottle from the developer outlet contact, and then
remove it.
Important: Cover surrounding surfaces with paper. This will prevent spillage from
the developer bottle spoiling them.
15. Remove the seal (1) that is stuck to the developer bottle.
1
1
36
RPG053
RPG048