4. Push the developer bottle in the direction of the arrow (1) until it can go no
further and locks into place.
5. Pull the seal (1) completely away.
6.
Open the TCRU display. (See "OPENING THE TCRU DISPLAY".)
7.
Press the [Developer] button.
8.
Press the [Reset PM Counter Developer:Reload] button.
9.
If a confirmation message appears, press the [Continue] button.
10.
Select the developer you want to replace, and then press the [Continue] button.
Note:
The new developer begins pouring in.
1
RPG051
1
RPG050
39