Fax / I-Fax > Common Rx/Forward Requirements > General - Kyocera FS C5015N - Color LED Printer Operation Manual

COMMAND CENTER Pages
FAX / i-FAX > Common RX/Forward Requirements > General
Types of RX/Forward Requirements
Settings for Forwarding Processes Using a Requirement List
1
2
3-21
Duplex Printing
Specifies whether or not to use the Duplex mode.
2 in1 Receive
Enables or disables 2 in1 reception.
Receive Bulk Print
Enables or disables FAX bulk reception. When enabled, the FAX system
prints the received documents after its reception completes. It will be
possible to make copies during that reception.
Conditional reception/forwarding is a function for automatically forwarding
documents received by FAX or i-FAX to other FAX machines, sending them as
attachments to E-mail, or saving them into a FAX box instead of printing if they
satisfy the specified conditions.
For example, you can forward faxes from particular customers received during
business hours to the E-mail addresses of the people responsible for those
customers, print and save them in a FAX box if they are received outside
business hours, and forward faxes from outside of your business area to the
business office nearest to the sender's fax number.
For models that do not support RX/Forward Requirements, the documents
received are forwarded in the same requirement.
Open the FAX/i-FAX > Common > RX/Forward Requirements > General
page. Select one of the following items.
Off
Disables the forwarding process. Received faxes are printed on paper as in
normal operation.
Use Requirements List
Executes the forwarding process according to the specified conditions. For
the setting procedure, refer to
All
Executes the forwarding process without specifying conditions. All received
faxes are processed in the same way. However, the process of saving them
in a FAX box cannot be selected. Clicking Advanced invokes a behaviour
equal to specifying all conditions. For the setting procedure, refer to
for Applying the Same Forwarding Process without Using a Requirement List
on page 3-24.
Open the FAX/i-FAX > Common > RX/Forward Requirements >
Requirement List page.
Add the new condition to the Requirement List. Click Add.
The Requirement List - Add page appears. Specify the condition for the FAX
forwarding process.
Requirement Number
Enter a number that identifies the condition set.
Name
Setting Destinations on page 3-25.
Settings
User Guide