Advanced > Protocols > Ipp; Advanced > Protocols > Thinprint; Advanced > Protocols > Appletalk - Kyocera FS C5015N - Color LED Printer Operation Manual

Advanced > Protocols > IPP
Advanced > Protocols > ThinPrint
Advanced > Protocols > AppleTalk
COMMAND CENTER
Remote Print Mode
Enables or disable Remote Print Mode.
Print Server Name
Enter the name of the printer server that the remote printer belongs to.
Job Timeout
Enter the timeout in seconds.
Using IPP (Internet Printing Protocol) or IPP over SSL, you can output to the
printing system over the Internet or an intranet.
IPP
Enables or disables IPP.
IPP Port Number
Sets the port number to be used by IPP. In normal situations, set this port
number to 631, e.g. http://(IP address):631/printers/lp1
IPP over SSL
Enables or disables the IPP over SSL protocol. When this is set to On, SSL
in the secure protocol settings must also be set to On. For details on secure
protocol, see Advanced > Security > Secure Protocols
IPP over SSL Port Number
Sets the port number to be used by IPP over SSL. In normal situations, set
this port number to 443, e.g. https://(iP address):443/printers/lp1
Enabling ThinPrint allows the reception and decompression of compressed print
jobs using the ThinPrint technology within a network. For the implementation,
the system uses a ThinPrint port. The default port is port 4000.
ThinPrint
Enables or disables the ThinPrint protocol.
ThinPrint Port Number
Set the ThinPrint Port Number or use the default port 4000.
ThinPrint over SSL
Enables or disables the ThinPrint over SSL protocol. When this is set to On,
SSL in the secure protocol settings must also be set to On. For details on
secure protocol, Advanced > Security > Secure Protocols
You can print from Macintosh computers using the AppleTalk protocol.
The printing system network component supports Mac OS of various versions
(Web browser on page 1-1) and is compatible with LaserWriter driver version
8.x.
To set up the Ethernet interface to communicate via AppleTalk, enables
AppleTalk protocol operation on the printing system.
AppleTalk
Enables or disables AppleTalk protocol.
Printer Name
COMMAND CENTER Pages
on page 3-51.
on page 3-51.
3-40