Scanner > Send And Forward - Kyocera FS C5015N - Color LED Printer Operation Manual

COMMAND CENTER Pages
Scanner > Send and Forward
1
2
1
2
3
4
3-19
• %serial = Serial Number
• %etheraddr = MAC Address
• %host = Host Name
• %ip = IP Address
Body
You can enter the information that you want to appear in the body of the
E-mail.
When sending a FAX, FTP, SMB or a E-mail job, Send and Forward
automatically forwards the same job to a destination specified. The following
section provides a summary of the items displayed on the Send and Forward
page.
Forward
Switches Send and Forward on or off.
Rule
Selects a rule of either FAX, FTP, SMB or E-mail to activate Send and
Forward.
Add
Adds a destination for forwarding. To add a destination, proceed as follows:
Click Add.
In Address Type, select the type of destination from the following:
• Email - forwards the E-mail to the E-mail address entered.
• SMB - forwards the job to a shared folder on Microsoft Windows network.
Enter the Host Name, Port Number, path to a shared folder, Login User
Name, and the Login Password.
• FTP - forwards the jobs to an accessible FTP server. Enter the Host Name,
Port Number, path to a folder, Login User Name, and the Login Password.
Adding an Address from an Address Book
To add an address from an Address Book, if set up, proceed as follows:
Click Import Contacts.
The address book opens. Check the check box for the address you want to add
to the destination.
After you have finished selection, click Submit.
The Send and Forward page appears. Check that the destination is added to
the destination list.
Delete
To delete a destination from Destination Settings, click the check box next
to the destination, then click Delete. If you accept the confirming prompt,
click Delete.
User Guide