Fax / I-Fax > Fax > Receive - Kyocera FS C5015N - Color LED Printer Operation Manual

COMMAND CENTER Pages
FAX / i-FAX > FAX > Receive
3-27
Sets the volume of the internal speaker that allows you to listen to conditions
on the telephone line when the [On-Hook] key was pressed. The choices
are Off and levels 1, 2 or 3.
Monitor Volume
Sets the volume of the internal speaker that allows you to listen to conditions
on the telephone line when the [On-Hook] key was not pressed. The
choices are Off and levels 1, 2 or 3.
The table below provides a summary of the items displayed on the Receive
page.
FAX Receive
Selects the FAX reception mode. The choices are Auto (Normal, FAX/TEL,
TAD or DRD) or Manual. (The selectable option is different depending on
the destination.)
DRD Pattern
Selects the DRD pattern. This menu is available only for specific
destinations.
Remote Switching Dial Number
Specifies the remote switching dial number. You can specify it within a range
of 00 to 99. Remote switching allows you to initiate FAX reception from a
telephone connected to the FAX system.
Encryption Key No.
Sets the encryption key number to be used for encrypted communication.
F-NET
Sets the silent reception. (Available only in Japan.)
Dial-in
Activates the dial-in (direct number) call. (Available only in Japan.)
Dial-in Number
Specifies the telephone number for direct number. (Available only in Japan.)
Dial-in FAX Number
Specifies the telephone number for direct FAX number. (Available only in
Japan.)
Reception Port
Sets the receive-only port. (Available in multiport mode).
Number of Rings (Normal)
Specifies the number of rings for Auto FAX reception (Normal). You can
specify it within a range of 1 to 15.
Number of Rings (TAD)
Specifies the number of rings for Auto FAX reception (TAD). You can specify
it within a range of 1 to 15.
Number of Rings (FAX/TEL)
Specifies the number of rings for Auto FAX reception (FAX/TEL). You can
specify it within a range of 0 to 15. This is not displayed on European
models.
User Guide