Connecting The Monitor; Connecting The Playback Components; Dvd Player - Denon AVR-488 Owner's Manual

ENGLISH

Connecting the Monitor

Connect the cables to be used.
Monitor
NOTE
• The component video connectors may be indicated differently on your monitor. For details, see the
monitor's operating instructions.
• To play the sound by AVR-488, make analog or digital audio output connections to AVR-488's audio input
connectors.
• The signals output from the HDMI connectors are only the HDMI input signals.
• AVR-488's S-Video connectors (input and output) and video connectors (input and output) have
independent circuit structures, so that video signals input from the S-Video connectors are only output
from the S-Video connector outputs and video signals input from the pin connectors are only output from
the pin connector outputs.
• The signals input to the component (color difference) video connectors are not output from the VIDEO
output connector (yellow) or the S-Video output connector.


Connecting the Playback Components

Carefully check the left (L) and right (R) channels and the inputs and outputs, and be sure to interconnect
correctly.

DVD Player

• Connect the cables to be used.
• With HDMI connections, the video and audio signals can be transferred with a single cable.
DVD player
L R
L R
• Connect an HDP (High-Definition Player) in the same way.
• When using a optical cable for the digital audio connection, make the settings at "system Setup" –
"Input Setup" – "Digital In Assign" (vpage 22).
• AVR-488's S-Video connectors (input and output) and video connectors (input and output) have
independent circuit structures, so that video signals input from the S-Video connectors are only output
from the S-Video connector outputs and video signals input from the pin connectors are only output from
the pin connector outputs.
• The signals input to the component (color difference) video connectors are not output from the VIDEO
output connector (yellow) or the S-Video output connector.