Tone Control - Denon AVR-488 Owner's Manual

ENGLISH
CENTER WIDTH
Assign center channel signal to front left and right channels for wider
sound.
[Variable range] 0 ~ 3 ~ 7
DELAY TIME
Adjust delay time to control sound stage size.
0 ms ~
[Variable range] 30 ms
EFFECT LEVEL
Adjust the strength of the surround effect.
[Variable range] 1 ~ ~ 15
10
Set to a lower level if the positioning and sense of phase of the
surround signals seems unnatural.
ROOM SIZE
Determine size of acoustic environment.
[Selectable items]
small
: Simulate acoustics of a small room.
med. s
medium
med. l
large
: Simulate acoustics of a large room.
NOTE
"ROOM SIZE" does not indicate the size of the room in which sources
are played.

SUBWOOFER ATT.
Attenuate subwoofer level when using EXT. IN mode.
[Selectable items]
ON
: The input from the subwoofer channel is attenuated.
OFF
: The input from the subwoofer channel is not attenuated.
Usually use in this mode.
~ 300 ms
Set this to "ON" if the subwoofer channel level seems too high when
playing audio signal.
Subwoofer
Turn subwoofer output on and off.
[Selectable items]
ON
: The subwoofer is used.
OFF
: The subwoofer is not used.
Default
Resets the settings to the default values.

Tone Control

Adjust the tonal quality of the sound.
Tone defeat mode can be called out directly by pressing the TONE
DEFEAT button on the main unit.
Tone Defeat
Turn tone adjustments off.
[Selectable items]
ON
: Playback without tone adjustment.
OFF
: Allow tone adjustment (treble, bass).
The tone cannot be adjusted when in the DIRECT mode.
Bass
Adjust low frequency range (bass).
[Variable range] –14dB ~ 14dB
Treble
Adjust high frequency range (treble).
[Variable range] –14dB ~ 14dB
"Bass" and "Treble" can be set when "Tone Defeat" is set to "OFF" .