ENGLISH FRANCAIS SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage”...
Page 3
2. IMPORTANT NOTICE: DO NOT MODIFY THIS PRODUCT This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modification not expressly approved by DENON may void your authority, granted by the FCC, to use the product. 3. NOTE This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
ENGLISH Contents Getting Started Accessories ······················································································2 Cautions on Handling ·····································································2 Cautions on Installation ·································································2 About the Remote Control Unit ····················································3 Inserting the Batteries ····································································3 Operating Range of the Remote Control Unit ································3 Part Names and Functions ·····························································4 Front Panel ·····················································································4 Display ···························································································4 Rear Panel ······················································································5 Remote Control Unit ······································································6...
Specifications ··············································································· 48 List of preset codes ··········································· End of this manual Getting Started Thank you for purchasing this DENON product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading them, be sure to keep them for future reference.
ENGLISH About the Remote Control Unit In addition to the AVR-488, the included remote control unit (RC-1079) can also be used to operate the equipment listed below. q DENON system components w Non-DENON system components • By setting the preset memory (vpage 37 ~ 39)
Part Names and Functions For buttons not explained here, see the page indicated in parentheses ( ). Front Panel W2 W3 W4 W5 W6 Power operation button SELECT / ENTER knob ························· (19, 25) (ON/STANDBY) ··········································· (29) Power indicator ··········································· (29) •...
ENGLISH Rear Panel Digital audio connectors (OPTICAL / COAXIAL) ························ (11 ~ 13) Analog audio connectors (AUDIO) ·············(11) EXT. IN connectors ····································· (15) PRE OUT connector ······································ (9) AC OUTLETS ··············································· (17) Power cord ·················································· (17) VIDEO / S-VIDEO connectors ·····················(11) Speaker terminals (SPEAKERS) ··················...
Please select the types of connections suited for the equipment you are connecting. With some types of connections, certain settings must be made on the AVR-488. For details, refer to the instructions for the respective connection items below. NOTE •...
Center speaker Front speakers Place the front speakers to the sides of the monitor or screen and as flush with the screen surface as possible. The table below shows a typical speaker configuration for the AVR-488. FRONT CENTER 5.1-channels 3.1-channels 2.1-channels –...
Connecting the Speaker Cables Carefully check the left (L) and right (R) channels and + (red) and – (black) polarities on the speakers being connected to the AVR-488, and be sure to interconnect the channels and polarities correctly. Front speakers Center speaker Peel off about 0.03 ft/10 mm...
The AVR-488 is compatible with HDMI Ver. 1.3a Deep Color and xvYCC. NOTE • The audio signal input to the HDMI input connector cannot be played on the AVR-488. Input the audio signal to the digital audio input connector or analog audio input connector.
• The component video connectors may be indicated differently on your monitor. For details, see the monitor’s operating instructions. • To play the sound by AVR-488, make analog or digital audio output connections to AVR-488’s audio input connectors. • The signals output from the HDMI connectors are only the HDMI input signals.
Setup” – “Digital In Assign” (vpage 22). iPod ® Use a DENON Control Dock for iPod (ASD-1R, sold separately) to connect the iPod to the AVR-488. For instructions on the Control Dock for iPod settings, refer to the Control Dock for iPod’s operating instructions.
Connect the cables to be used. Video cassette recorder • When recording via the AVR-488, the playback device’s cable must be of the same type as the cable used to connect the AVR-488’s VCR OUT connector. Example: TV IN → S-Video cable : VCR OUT → S-Video cable TV IN →...
CD Recorder / MD Recorder / Tape Deck Connect the cables to be used. CD recorder / MD recorder / Tape deck Connections to Other Devices Carefully check the left (L) and right (R) channels and the inputs and outputs, and be sure to interconnect correctly.
“EXT. IN” (vpage 29). • The video signal can be connected in the same way as a DVD player (vpage 11). • To play copyright-protected discs, connect the AVR-488’s EXT. IN connector with the DVD player’s analog multi-channel output connector.
Antenna terminals An F-type FM antenna cable plug can be connected directly. Direction of broadcasting station FM antenna AM loop antenna (supplied) AM outdoor antenna Ground AM loop antenna assembly Connect to the AM antenna terminals. Remove the vinyl tie and take Bend in the reverse direction.
ENGLISH Connecting the Power Cord Wait until all connections have been completed before connecting the power cord. Power cord • These outlets supply power to external audio devices. • The power supplied from these outlets turns on and off together with the set’s power switch. •...
Buttons on the main unit and remote control unit • Make detail settings for various parameters. • With the AVR-488, settings and operations for most functions can be performed by operating while looking at the items displayed on the main unit.
Speaker Setup Perform this setting if you wish to make the settings for your speaker systems manually. a ~ f Speaker Configuration Subwoofer Mode Setup h ~ A1 Distance Crossover Frequency Test Tone a ~ f Speaker Configuration Select speaker configuration and size. (bass reproduction capability) [Display] .
ENGLISH A2 Crossover Frequency Select crossover frequency from which subwoofer handles low range signal. [Display] . S p 2 . I n 3 . O p S p e a k e r S e t u p 1 2 C r . O v e r 8 0 H z [Selectable items] 40Hz 60Hz...
Input Setup Use this procedure to select the input source and make the settings related to playing input sources. HDMI In Assign a, s d ~ h Digital In Assign iPod Assign EXT. IN Subwoofer Level Auto Preset Memory Antenna Aiming a, s HDMI In Assign Select HDMI connector to assign to this source.
ENGLISH l Auto Preset Memory Use the auto preset function to program radio stations. [Display] 1 . S p . I n 3 . O p I n p u t S e t u p 9 P r e s e t < S t a r t Press the button to start.
5 R e m o t e I D 1 [Selectable items] NOTE When using the AVR-488 with only the included remote control unit (RC-1079), there is no need to make settings. When using a separately sold remote control unit (RC-7000CI, etc.), this function can be used.
STD button on the remote control unit. DSP Simulation Playback The desired mode according to the program source and viewing situation can be selected from among 7 DENON original surround modes. The surround parameters can be adjusted (vpage 43, 44) to achieve an even more realistic, powerful sound field.
Stereo Playback [Selectable items] STEREO This is the mode for playing in stereo. The tone can be adjusted. Sound is output from the front left and right speakers and subwoofer. Direct Playback [Selectable items] DIRECT In this mode the signals bypass the tone adjustment circuitry for high quality sound.
ENGLISH CENTER WIDTH Assign center channel signal to front left and right channels for wider sound. [Variable range] 0 ~ 3 ~ 7 DELAY TIME Adjust delay time to control sound stage size. 0 ms ~ ~ 300 ms [Variable range] 30 ms EFFECT LEVEL Adjust the strength of the surround effect.
RESTORER This function restores compressed audio signals to how they were before compression and corrects the sense of volume of the bass and treble to obtain richer playback sound. [Selectable items] Do not use RESTORER. Mode1 (RESTORER 64): Optimized mode for compressed sources with very weak highs. Mode2 (RESTORER 96): Apply suitable bass and treble boost for all compressed sources.
Turning Off the Sound Temporarily (Muting) [MUTING] Press To cancel, press [MUTING] again. Muting can also be canceled by adjusting the master volume. Listening with Headphones <PHONES> Plug the headphones into The sound from the speakers and pre-out connectors is automatically cut.
ENGLISH <SOURCE SELECT> SHIFT STATUS TUNING <PRESET CHANNEL> [Front] SHIFT [CHANNEL] [SAT TU] STATUS [MODE SELECTOR 1] [Rear] TUNING [MEMORY] About the button names in these explanations < > : Buttons on the main unit : Buttons on the remote control unit Button name only: Buttons on the main unit and remote control unit Presetting Radio Stations...
Listening to XM Satellite Radio Programs ABOUT XM RADIO XM Radio offers an extraordinary variety of commercial-free music, plus the best in premier sports, news, talk radio, stand-up comedy, children’s and entertainment programming. XM is broadcast in superior digital audio from coast to coast. From rock to reggae, from classical to hip hop, XM has something for every music fan.
Basic Operation Make the necessary preparations. q S et the iPod in the DENON Control Dock for iPod. (vSee the Control Dock for iPod’s operating instructions.) w Assign the Control Dock for iPod’s input. to select ”System Setup”...
• The title name, artist name and album name can be checked by pressing STATUS during playback. • On the AVR-488, folder and file names can be displayed as titles. Any characters that cannot be displayed are replaced with “ . (period)” .
ENGLISH <SOURCE SELECT> <SPEAKER B> <SPEAKER A> <POWER> <QUICK SELECT> <ENTER>, op <REC SELECT> [Front] [CH SELECT] uiop [Rear] uiop About the button names in these explanations < > : Buttons on the main unit : Buttons on the remote control unit Button name only: Buttons on the main unit and remote control unit Other Operations and...
Quick Select Function With this function, the currently playing input source, input mode, surround mode and volume can be stored in the memory. Set the input source, input mode, surround mode and volume to the conditions you want to store. QUICK SELECT>...
Presetting • DENON and other makes of components can be operated by setting the preset memory. • Operation is not possible for some models. [MODE SELECTOR 1] to “AUDIO”...
Page 41
Functions of Buttons by Component n Front [OFF] [ON/SOURCE] [SHIFT] [CHANNEL +/–] [1], [2], [3], [A/B], [0], [DISC SKIP +], [6 7], [8 9], [SETUP], [uiop], [VCR CH +/–] [AUDIO], [ENTER], [DISPLAY], [RETURN], [MENU] [MODE [MODE SELECTOR 1] SELECTOR 2] Device CD Player iPod...
Page 42
SUBTITLE DISPLAY – – – – RETURN – – – – Default DENON DENON setting – – (111) (151) (Preset code) Special – Remarks GSpecial RemarksH q Only one device can be set in the preset memory for each mode. Also, when a new code is preset, the previous code is automatically deleted.
[Front] [1], [2], [3], [0], [6], [7], [8], [9] [MODE [MODE SELECTOR 1] SELECTOR 2] [Rear] [NUMBER] [MEMORY] [RETURN] Punch Through Function “Punch Through” is a function allowing you to operate 1, 2, 3, 0, 6, 7, 8 and 9 on CD, iPod/NETWORK, TAPE/CD-R/ MD, DVD/VDP or VCR components when in the SAT/CABLE or TV mode.
G As seen from the side H Surround The AVR-488 is equipped with a digital signal processing circuit that lets you play program sources in the surround mode to achieve the same sense of presence as in a movie theater.
Page 45
Neural Surround Neural Surround™, a breakthrough in audio technology, will bring the excitement of surround music to more of America’s listening audience. It provides the rich envelopment and discrete image detail of surround sound in a format 100 % compatible with stereo. With superior spectral resolution and channel separation, Neural Surround™...
ENGLISH Surround Modes and Parameters Channel output Surround mode Front L/R Center DIRECT STEREO EXT. IN DOLBY PRO LOGIC g DTS NEO:6 DOLBY DIGITAL DTS SURROUND neural 5CH STEREO ROCK ARENA JAZZ CLUB MONO MOVIE VIDEO GAME MATRIX VIRTURL S : Signal / Adjustable A : No signal / Not adjustable D : Turned on or off by speaker configuration setting NOTE1 : This parameter is availabe when “Parameter”...
Page 47
Surround mode PRO LOGIC g MUSIC mode only PANORAMA DIMENSION CENTER WIDTH CENTER IMAGE DIRECT STEREO EXT. IN DOLBY PRO LOGIC g S (OFF) S (3) S (3) DTS NEO:6 DOLBY DIGITAL DTS SURROUND neural 5CH STEREO ROCK ARENA JAZZ CLUB MONO MOVIE VIDEO GAME MATRIX...
Page 48
ENGLISH Differences in Surround Mode Names Depending on the Input Signals Button Surround mode ANALOG STANDARD DTS SURROUND DTS SURROUND DTS 96/24 DTS NEO:6 CINEMA DTS NEO:6 MUSIC DOLBY SURROUND DOLBY DIGITAL DOLBY PRO LOGIC g CINEMA DOLBY PRO LOGIC g MUSIC DOLBY PRO LOGIC g GAME DOLBY PRO LOGIC neural...
• Set is damaged. • Turn off the power and contact a DENON service center. Cause Countermeasure • Batteries are worn. • Replace with new batteries. • You are operating outside of the •...
Page 50
GXM Satellite RadioH • The audio signal input to the HDMI input connector cannot be Symptom played on the AVR-488. Input the ”CHECK audio signal to the digital audio ANTENNA” is input connector or analog audio displayed in the input connector.