Antenna Terminals - Denon AVR-488 Owner's Manual

Antenna terminals

An F-type FM antenna cable plug can be connected directly.
FM antenna
AM loop antenna
(supplied)
AM outdoor antenna
Ground
AM loop antenna assembly
Connect to the AM
antenna terminals.
Remove the vinyl tie and take
out the connection line.
a. With the antenna on top of
any stable surface.
Mount
Installation hole Mount on wall, etc.
Direction of broadcasting station
75 Ω/ohms
Coaxial cable
FM indoor antenna
(supplied)
1. Push the
NOTE
• Do not connect two FM antennas simultaneously.
• Even if an external AM antenna is used, do not
disconnect the AM loop antenna.
Bend in the reverse direction.
• Make sure the AM loop antenna lead terminals do not
touch metal parts of the panel.
b. With the antenna attached
Note to CATV system installer:
to a wall.
This reminder is provided to call the CATV system
installer's attention to Article 820-40 of the NEC
which provides guidelines for proper grounding and,
in particular, specifies that the cable ground shall be
connected to the grounding system of the building,
as close to the point of cable entry as practical.
Connection of AM antennas
2. Insert the 3. Return the
lever. conductor. lever.
ENGLISH