Speaker Setup; A ~ F Speaker Configuration; Subwoofer Mode Setup; H ~ A1 Distance - Denon AVR-488 Owner's Manual

Speaker Setup

Perform this setting if you wish to make the settings for your
speaker systems manually.

a ~ f Speaker Configuration

Subwoofer Mode Setup

g

h ~ A1 Distance

Crossover Frequency
A2
Test Tone
A3
a ~ f Speaker Configuration
Select speaker configuration and size.
(bass reproduction capability)
[Display]
1 . S p 2 . I n 3 . O p
S p e a k e r S e t u p
1 F r o n t L a r g e
4 S u b w o o f e r Y e s
Front Speaker
Select front speaker size.
[Selectable items] Large Small
Center Speaker
Select center speaker use and size.
[Selectable items] Large Small None
Surround Speaker
Select surround speakers use and size.
[Selectable items] Large Small None
Subwoofer
Select subwoofer use.
[Selectable items]
Large
: Select this when using large speakers with ample low
frequency reproduction capabilities.
Small
: Select this when using small speakers without ample low
frequency reproduction capabilities.
None
: Select this when no speaker is connected.
Yes
: Select this when a subwoofer is connected.
No
: Select this when no subwoofer is connected.
• Select "Large" or "Small" not according to the physical size of the
Q
speaker but according to the low frequency reproduction capabilities
based on the frequency set at "Crossover Frequency" (vpage
21).
Q
• When "Front Speaker" is set to "Small" , "Subwoofer" is automatically
set to "Yes" .
• If "Subwoofer" is set to "No" , "Front Speaker" is automatically set to
Q
"Large" .
g Subwoofer Mode Setup
Select low range signal to be reproduced by subwoofer.
[Display]
1 . S p 2 . I n 3 . O p
S p e a k e r S e t u p
[Selectable items]
LFE (Normal)
: Play low range and LFE signal of channels set to
"Small" .
LFE+Main
: Play low range and LFE signal of all channels.
Yes No
Q
Q
5 S W M o d e N o r m
• This can be set when "System Setup" – "Speaker Setup" –
"Subwoofer" is set to "Yes" .
• Play music or a movie source and select the mode offering the
strongest bass.
• Select "LFE+Main" if you want the bass signals to always be
produced from the subwoofer.
h ~ A1 Distance
Set distance from listening position to speakers.
Before making the settings, measure the distance from the
listening position to the different speakers.
[Display]
1 . S p 2 . I n 3 . O p
S p e a k e r S e t u p
6 F L 1 2 f t
1 1 S W 1 2 f t
Distance measurement
Select the speaker you want to set, then set the distance.
Set the value closest to the measured distance.
[Variable range]
0ft ~ 60ft
: Settable in units of 1 foot.
NOTE
Set the distance between the listening position and the various
speakers to no more than 20 ft.
Operations
( v page 19)
ENGLISH
Q
Q
Q
0